Project Description

2L/5L Vacuum Mixer

Dual shaft mixer & Disperser is a new model that combines the traditional mixer and high speed disperser. In response to the high solid content and high viscosity characteristics of the power battery slurry, an enhanced power mixer with higher speed and larger torque has been developed based on the original planetary power mixer.

Contact

2L Technical Parameters

vacuum -0.098MPa
structure type single arm
Rotating speed Revolution: 0 ~ 52r/min, rotation: 0 ~ 76r/min

(frequency conversion speed regulation);
High speed: 0~9000r/min

(frequency conversion speed regulation).

low speed shaft Twist paddle (with scraper)
Linear Guides Taiwan HIWIN
dispersion axis Single high-speed shaft, two Φ40 dispersion discs on the shaft.
lifting method Linear guide rail material cylinder electric lift, (0.37KW reducer)
lifting height 180mm
temperature measurement method The barrel wall PT100 sensor contacts the material
barrel positioning The fixed block of the arc-shaped plate is used to lift and place, and the flange structure is set on the upper barrel to ensure the center positioning.
total power 2.6kw+0.37KW reducer
power supply AC: 3*380V, 50HZ
Dimensions Length 1100 Width 660 Height 1300 (mm)
weight about 450kg

5L Technical Parameters

structural style Single arm type
speed r/min  Turn: 0 ~ 61 r/min, turn: 0 ~ 125 r/min (frequency conversion speed regulation);

High speed: 0 ~ 6800 r/min (variable frequency speed regulation).

low speed shaft Mahua paddle
Scratch the wall shaft 304 # material with 304 # scraper + PTeflon scraper
linear guide rail: Taiwan HIWIN
Dispersed axis Single high-speed axis, 2 sets of dispersed axis, two Φ 50 dispersed disks on each axis. Hardness HRC 63, linear speed up to 25m / s
Lift way Electric lifting of linear rail material cylinder, (0.37KW reducer)
Lift height 180mm
Temperature measurement mode The bucket wall PT 100 sensor contacts the material
 Bucket positioning The arc plate is arranged, and the upper bucket is equipped with flange structure to ensure the central positioning.
aggregate capacity (KW) 7kw
source AC:3*380V、50HZ
outline dimension Long 1250 W 770 H 1450 (mm)
weight (kg) About 670kg
noise Test noise from 1m distance of the outer wall of the equipment: 75dB
Solid content 10%—72%
Applicable to slurry viscosity 1000—40000mpa.s
Stir form Compatible with dry process and wet process mixing process
Temperature display accuracy 0.1℃
seal components NMP corrosion resistance
Overtemperature alarm function The temperature can be set by itself
product percent of pass 100%
equipment failure rate 1% of the failure caused by the equipment
downtime 30min / day (more than 30min fault once / month)
Equipment growth rate ≥98%
function With a vacuum device, with electronic scale, the positive and negative electrode is equipped with scraper fineness meter
Safety protection design The mixing tank body has a safety protection design
control method Siemens, PLC + Kunlun pass state, human-machine interface
cooling water Equipped with chiller, cooling water inlet pneumatic ball valve, with flow switch.
temperature controlling system Temperature range 0~80℃, cooling chiller 5℃, chiller flow 10L / min
Motor and electric box Explosion-proof design