Project Description
Die Cutting Machine
This machine is suitable for the cutting of polymer lithium battery electrode sheet. The machine is simple in structure and easy to operate. During operation, put the cut large pole sheet on the knife mold, push the knife mold to the cutting position, press the start button with both hands, close the upper mode, release the button, open the upper die, that is, to complete the cutting of the pole piece.
- Electrical technical parameters
Rated voltage: AC 220V
Working Frequency: 50 HZ
Rated power: 0.2KW
Compressed air: 0.6 MPA <0.7 AMPA
project | technical requirement |
contour size of the unit | 700*700*1650mm |
gross weight of equipment | ≤310kg |
The maximum can be put knife mold | 280*280*50 |
Maximum flush cut area | 280*280mm |
Extra piece appearance | Burrs are less than 25um |
Module pressure | 0-5T adjustable |
Up and down stamping template spacing | About 60mm |
Stamping schedule | 100mm |
The workbench is far away from the ground | 700mm |
flatness | <0.2mm |
upper spider | 4040 aluminum profile |
lower bearing bracket | 5050 square pipe welding |